Introduzione

This guide will show you how to replace your Alcatel Pop 4 Plus speaker. This guide involves removing the back cover and the secondary cover where the speaker is located. Then you just pop it out and put in the new speaker.

  1. Remove the back cover by sliding your fingernail in the grove around the edge of the phone and prying it off.
    • Remove the back cover by sliding your fingernail in the grove around the edge of the phone and prying it off.

    Aggiungi Commento

  2. Remove seventeen 3mm Phillips #000 screws from the mid-frame.
    • Remove seventeen 3mm Phillips #000 screws from the mid-frame.

    Aggiungi Commento

  3. Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK al checkout
    Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK
    • Use the flat end of the spudger, or your fingernail, to pry off the mid-frame.

    Aggiungi Commento

    • Use the flat end of the spudger disconnect the battery from the motherboard.

    • Use the flat end of the spudger tool to pry out the battery.

    Aggiungi Commento

    • Use a spudger to pry the speaker from the mid-frame.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Maalik Poleon

Membro da: 25/01/2018

196 Reputazione

2 Guide realizzate

Team

USF Tampa, Team S20-G6, Passmore Spring 2018 Membro di USF Tampa, Team S20-G6, Passmore Spring 2018

USFT-PASSMORE-S18S20G6

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 8

Tutti i Tempi: 71