Salta al contenuto principale

Introduzione

This guide will show you how to take out your Alcatel Pop 4 Plus rear facing camera for replacement/repair.

Parti

Nessuna parte specificata.

  1. Remove the back cover by sliding your fingernail in the grove around the edge of the phone and prying it off. Remove the back cover by sliding your fingernail in the grove around the edge of the phone and prying it off.
    • Remove the back cover by sliding your fingernail in the grove around the edge of the phone and prying it off.

  2. Remove seventeen 3mm Phillips #000 screws from the mid-frame. Remove seventeen 3mm Phillips #000 screws from the mid-frame.
    • Remove seventeen 3mm Phillips #000 screws from the mid-frame.

  3. Use the flat end of the spudger, or your fingernail, to pry off the mid-frame.
    • Use the flat end of the spudger, or your fingernail, to pry off the mid-frame.

  4. Use the flat end of the spudger disconnect the battery from the motherboard. Use the flat end of the spudger tool to pry out the battery.
    • Use the flat end of the spudger disconnect the battery from the motherboard.

    • Use the flat end of the spudger tool to pry out the battery.

  5. Use the flat end of the spudger tool to remove the connector.
    • Use the flat end of the spudger tool to remove the connector.

  6. Pry out the camera with the pointy end of the spudger tool.
    • Pry out the camera with the pointy end of the spudger tool.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Maalik Poleon

Membro da: 25/01/2018

196 Reputazione

2 Guide realizzate

Team

USF Tampa, Team S20-G6, Passmore Spring 2018 Membro di USF Tampa, Team S20-G6, Passmore Spring 2018

USFT-PASSMORE-S18S20G6

4 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 87