Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Afridev Axle and Handle Replacement

Introduzione

This guide will show you how to remove both the axle and the handle, so that you can replace either one or both.

Cosa ti serve

  1. Afridev Axle and Handle Replacement, Head: passo 1, immagine 1 di 2 Afridev Axle and Handle Replacement, Head: passo 1, immagine 2 di 2

    • Assemble the required tools, including the Afridev tool and crescent wrenches.

    Traduci

  2. Afridev Axle and Handle Replacement: passo 2, immagine 1 di 3 Afridev Axle and Handle Replacement: passo 2, immagine 2 di 3 Afridev Axle and Handle Replacement: passo 2, immagine 3 di 3

    • Perform a water test on the pump, by raising and lowering the handle a full 40 strokes. A properly performing pump will yield greater than 10 liters.

    Traduci

  3. Afridev Axle and Handle Replacement: passo 3, immagine 1 di 2 Afridev Axle and Handle Replacement: passo 3, immagine 2 di 2

    • Loosen the bolt on front of the face plate with the Afridev tool.

    • Remove the plate from the pump by lifting it straight up.

    Traduci

  4. Afridev Axle and Handle Replacement, Axle and Handle: passo 4, immagine 1 di 3 Afridev Axle and Handle Replacement, Axle and Handle: passo 4, immagine 2 di 3 Afridev Axle and Handle Replacement, Axle and Handle: passo 4, immagine 3 di 3

    • Insert the T-handle into the top cylinder of the exposed pump rod.

    Traduci

  6. Afridev Axle and Handle Replacement: passo 5, immagine 1 di 2 Afridev Axle and Handle Replacement: passo 5, immagine 2 di 2

    • Loosen the 2 bolts on either side of handle.

    • It is not necessary to remove the bolt at this time; however, take caution to not let the bolt fall out of the handle.

    Traduci

  7. Afridev Axle and Handle Replacement: passo 6, immagine 1 di 3 Afridev Axle and Handle Replacement: passo 6, immagine 2 di 3 Afridev Axle and Handle Replacement: passo 6, immagine 3 di 3

    • Loosen the 2 bolts on either side of the head to remove the handle from the pump rod.

    • It is not necessary to remove the bolt at this time; however, take caution to not let the bolt fall out of the handle.

    Traduci

  8. Afridev Axle and Handle Replacement: passo 7, immagine 1 di 2 Afridev Axle and Handle Replacement: passo 7, immagine 2 di 2

    • Lift the handle to a horizontal position.

    Traduci

  9. Afridev Axle and Handle Replacement: passo 8, immagine 1 di 3 Afridev Axle and Handle Replacement: passo 8, immagine 2 di 3 Afridev Axle and Handle Replacement: passo 8, immagine 3 di 3

    • While one person lifts up on the T-handle, remove the bolt and connection pieces.

    Traduci

  10. Afridev Axle and Handle Replacement: passo 9, immagine 1 di 3 Afridev Axle and Handle Replacement: passo 9, immagine 2 di 3 Afridev Axle and Handle Replacement: passo 9, immagine 3 di 3

    • Remove the bolt and connection pieces from the handle.

    • Set the bolt pieces in a sanitary place, such as a bucket, to prevent contamination.

    Traduci

  11. Afridev Axle and Handle Replacement: passo 10, immagine 1 di 2 Afridev Axle and Handle Replacement: passo 10, immagine 2 di 2

    • Remove the handle from the pump.

    • Be sure to set the handle in a sanitary place to prevent contamination.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 5 altri collaboratori

Jake Devincenzi

Membro da: 04/18/11

117.277 Reputazione

57 Guide realizzate

Distintivi: 51

+48 altri distintivi

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 6

Ultimi 30 Giorni: 12

Tutti i Tempi: 566