Salta al contenuto principale

Adjust Goose-neck (adjustable quill stem) on Specialized Expedition

Cosa ti serve

  1. Adjust Goose-neck (adjustable quill stem) on Specialized Expedition, Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: passo 1, immagine 1 di 2 Adjust Goose-neck (adjustable quill stem) on Specialized Expedition, Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: passo 1, immagine 2 di 2
    • Remove the bolt cover with a flathead screwdriver.

  2. Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: passo 2, immagine 1 di 3 Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: passo 2, immagine 2 di 3 Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: passo 2, immagine 3 di 3
    • Loosen the goose-neck (adjustable quill stem) with a 6 mm Allen wrench.

    • After loosening the goose-neck (adjustable quill stem), it still may be stiff. Hold the wheel from turning and twist the handlebars from side to side.

    • If quill stem is still stuck then place 6 mm Allen wrench firmly into bolt and tap with a mallet.

    • Position the handlebars to your preferred height. Make sure not to pull cable and housing to tight. I could adversely effect shifting and braking performance.

    • Make sure you don't raise quill stem above minimum insert line.

  3. Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: passo 3, immagine 1 di 3 Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: passo 3, immagine 2 di 3 Adjust Goose-neck (adjustable quill stem) on Specialized Expedition: passo 3, immagine 3 di 3
    • Align the direction of the goose-neck (adjustable quill stem) with the front tire.

    • Firmly tighten the goose-neck (adjustable quill stem) bolt using a 6 mm Allen wrench.

    • Pop the bolt cover back on.

    • If calling a bicycle repair shop, refer to it as a adjustable quill stem (technical term) instead of goose-neck as mechanic may not know what you are talking about.

Linea Traguardo

Un'altra persona ha completato questa guida.

aaron thielk

Membro da: 10/10/10

1.882 Reputazione

5 Guide realizzate

Team

Cal Poly, Team 5-13, Maness Fall 2010 Membro di Cal Poly, Team 5-13, Maness Fall 2010

CPSU-MANESS-F10S5G13

4 Membri

17 Guide realizzate

Un commento

Anyone know where/how to buy a replacement bolt cover?

Bennett Hart - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 11

Tutti i Tempi: 9,211