Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip your laptop over so that the model sticker is facing upward towards the ceiling.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a Phillips #1 screwdriver to remove the thirteen 6.5mm screws that secure the back cover.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a plastic opening tool to gently separate the back cover from the laptop. A snapping sound will be heard as a signal that the clips are being disengaged.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a Phillips #1 screwdriver to remove two 4 mm screws that secure the battery.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use your hand to carefully pull out the wiring harness from its port that is located between the battery and the motherboard.
-
Remove the battery from the case.
-
Annulla: non ho completato questa guida.
Altre 2 persone hanno completato questa guida.