Salta al contenuto principale

Acer Nitro 5 AN515-55-55M1 Motherboard Replacement

Cosa ti serve

  1. Acer Nitro 5 AN515-55-55M1 Motherboard Replacement, Bottom Cover: passo 1, immagine 1 di 1
    • Make sure the device is off and unplugged from power.

    • Flip the device so the bottom is facing up.

    • Remove 11 screws from the bottom case using a Phillips #1 screwdriver.

  2. Acer Nitro 5 AN515-55-55M1 Motherboard Replacement: passo 2, immagine 1 di 2 Acer Nitro 5 AN515-55-55M1 Motherboard Replacement: passo 2, immagine 2 di 2
    • Lift the top left and right corners up and away from the device.

    • This may require some force and will make harsh clicking sounds. This is normal; it's the plastic tabs separating from each other.

    • Remove the panel from the laptop.

  3. Acer Nitro 5 AN515-55-55M1 Motherboard Replacement, Battery: passo 3, immagine 1 di 3 Acer Nitro 5 AN515-55-55M1 Motherboard Replacement, Battery: passo 3, immagine 2 di 3 Acer Nitro 5 AN515-55-55M1 Motherboard Replacement, Battery: passo 3, immagine 3 di 3
    • Use an opening tool to disconnect the battery from the motherboard.

  4. Acer Nitro 5 AN515-55-55M1 Motherboard Replacement: passo 4, immagine 1 di 2 Acer Nitro 5 AN515-55-55M1 Motherboard Replacement: passo 4, immagine 2 di 2
    • Remove the two screws from the battery with a Phillips #1 screwdriver.

    • Remove the battery by pulling up and out from the left side.

  5. Acer Nitro 5 AN515-55-55M1 Motherboard Replacement, Motherboard: passo 5, immagine 1 di 3 Acer Nitro 5 AN515-55-55M1 Motherboard Replacement, Motherboard: passo 5, immagine 2 di 3 Acer Nitro 5 AN515-55-55M1 Motherboard Replacement, Motherboard: passo 5, immagine 3 di 3
    • Disconnect the seven cables from the motherboard using an iFixit opening tool.

  6. Acer Nitro 5 AN515-55-55M1 Motherboard Replacement: passo 6, immagine 1 di 3 Acer Nitro 5 AN515-55-55M1 Motherboard Replacement: passo 6, immagine 2 di 3 Acer Nitro 5 AN515-55-55M1 Motherboard Replacement: passo 6, immagine 3 di 3
    • Use an iFixit opening tool to lift the two Wi-Fi antenna cables up and away from the Wi-Fi card.

  7. Acer Nitro 5 AN515-55-55M1 Motherboard Replacement: passo 7, immagine 1 di 3 Acer Nitro 5 AN515-55-55M1 Motherboard Replacement: passo 7, immagine 2 di 3 Acer Nitro 5 AN515-55-55M1 Motherboard Replacement: passo 7, immagine 3 di 3
    • Remove the six screws surrounding the fan using a Phillips #1 screwdriver.

    • Remove the two shorter screws from the motherboard using a Phillips #1 screwdriver.

    • Lift the taped wires off of the fans on the right and left sides.

  8. Acer Nitro 5 AN515-55-55M1 Motherboard Replacement: passo 8, immagine 1 di 3 Acer Nitro 5 AN515-55-55M1 Motherboard Replacement: passo 8, immagine 2 di 3 Acer Nitro 5 AN515-55-55M1 Motherboard Replacement: passo 8, immagine 3 di 3
    • Lift up the right side of the motherboard.

    • The cables may need some guidance to leave the management holes on the motherboard.

    • Continue to lift at an angle until there is a give.

    • Remove the motherboard and fans from the laptop.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

Un commento

Where would I go to buy a new motherboard and display?

David Nguyen - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 21

Ultimi 30 Giorni: 143

Tutti i Tempi: 5,316