Aggiusta la tua roba Comunità Store

Acer Iconia Tab 8 A1-840 Speaker Replacement

Cosa ti serve

  1. Acer Iconia Tab 8 A1-840 Speaker Replacement, Back Panel: passo 1, immagine 1 di 1

    • Power off the device

    • Remove any cables that might be connected to your device

    • Make sure the device is placed on a flat surface with the display screen facing up

    Modifica

  2. Acer Iconia Tab 8 A1-840 Speaker Replacement: passo 2, immagine 1 di 1

    • Wedge the plastic opening tool in between the display screen and back panel

    • Do not apply too much pressure in order to avoid cracking the screen

    Modifica

  3. Acer Iconia Tab 8 A1-840 Speaker Replacement: passo 3, immagine 1 di 1

    • Carefully separate the display from the back panel

    Modifica

  4. Acer Iconia Tab 8 A1-840 Speaker Replacement, Battery: passo 4, immagine 1 di 1

    • Use your fingers to pull back and remove the yellow plastic tape covering the battery cable.

    Modifica

  5. Acer Iconia Tab 8 A1-840 Speaker Replacement: passo 5, immagine 1 di 1

    • Use the flat end of the spudger to pry up and remove the battery cable.

    Modifica

  7. Acer Iconia Tab 8 A1-840 Speaker Replacement: passo 6, immagine 1 di 1

    • Use the flat side of the heavy duty spudger to lift the small black plastic flap.

    Modifica

  8. Acer Iconia Tab 8 A1-840 Speaker Replacement: passo 7, immagine 1 di 1

    • Use fingers to pull the Zero Insertion Force (ZIF) cable from the motherboard.

    Modifica

  9. Acer Iconia Tab 8 A1-840 Speaker Replacement: passo 8, immagine 1 di 1

    • Use fingers to remove the smaller adjacent ZIF cable from the motherboard.

    Modifica

  10. Acer Iconia Tab 8 A1-840 Speaker Replacement: passo 9, immagine 1 di 1

    • Use the flat end of the spudger to pry the battery up from all edges, and remove it from the back panel.

    • There is adhesive behind the battery that holds it in place. Be sure to pry slowly and carefully when removing the battery.

    Modifica

  11. Acer Iconia Tab 8 A1-840 Speaker Replacement, Speaker: passo 10, immagine 1 di 1
    Attrezzo utilizzato in questo passaggio:
    Tweezers
    $4.99
    Compra

    • Use tweezers or the flat end of the spudger to carefully pull the connection loose.

    Modifica

  12. Acer Iconia Tab 8 A1-840 Speaker Replacement: passo 11, immagine 1 di 1

    • Use the pointy end of the spudger to remove the black tape holding the wires in place and completely free the wires.

    Modifica

  13. Acer Iconia Tab 8 A1-840 Speaker Replacement: passo 12, immagine 1 di 1

    • Use a 5mm nut driver and Philips#000 bit to remove the four 1.5mm screws.

    Modifica

  14. Acer Iconia Tab 8 A1-840 Speaker Replacement: passo 13, immagine 1 di 1

    • Remove the speakers after unscrewing the screws.

    Modifica

  15. Acer Iconia Tab 8 A1-840 Speaker Replacement: passo 14, immagine 1 di 1

    • Use spudger to loosen the wire and free the speaker.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 5 altri collaboratori

Claire Posadas

Membro da: 10/18/16

396 Reputazione

3 Guide realizzate

Distintivi: 6

+3 altri distintivi

Team

UW Tacoma, Team 1-1, Rose Fall 2016 Membro di UW Tacoma, Team 1-1, Rose Fall 2016

UWT-ROSE-F16S1G1

4 Membri

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 5

Tutti i Tempi: 767