Aggiusta la tua roba Comunità Store

Acer Iconia A100 Battery Replacement

Introduzione

A step-by-step guide that illustrates the necessary precautions for replacing a battery for the Acer Iconia A100 tablet.

Cosa ti serve

  1. Acer Iconia A100 Battery Replacement, Battery: passo 1, immagine 1 di 1

    • Start at any side of the tablet.

    • Begin to take apart the tablet with a plastic opening tool along the sides of the tablet.

    • Work your way around the tablet.

    • There are four side pieces in total.

    Modifica

  2. Acer Iconia A100 Battery Replacement: passo 2, immagine 1 di 1

    • Remove the five 4 mm screws from the edges of the tablet with a Phillips #00 screwdriver.

    Modifica

  4. Acer Iconia A100 Battery Replacement: passo 3, immagine 1 di 1

    • Carefully separate the back piece from the device using a plastic opening tool.

    • Remember to open along the entire perimeter of the tablet.

    Modifica

  5. Acer Iconia A100 Battery Replacement: passo 4, immagine 1 di 1

    • Turn the tablet over so that the battery is facing upwards.

    • Remove the four 4mm screws located around the battery.

    Modifica

  6. Acer Iconia A100 Battery Replacement: passo 5, immagine 1 di 2 Acer Iconia A100 Battery Replacement: passo 5, immagine 2 di 2

    • Use the tip of a plastic spudger or opening tool to gently push the connector head out of its socket.

    • Use your fingers or the flat edge of a plastic opening tool to lift the battery up and off of the device.

    • Be sure to not have any water around the device while removing the battery.

    • Be sure to be cautious while removing the battery and remove carefully; avoid ripping the wires attached to the battery.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 4

Ultimi 30 Giorni: 17

Tutti i Tempi: 1,844