Skip to main content

Introduzione

Replace the motherboard in a Acer Iconia A1-810.

Parti

Nessuna parte specificata.

  1. Remove the back cover by lifting with a plastic opening tool, below the camera button slot.
    • Remove the back cover by lifting with a plastic opening tool, below the camera button slot.

  2. Remove the black tape connecting the battery to the motherboard.
    • Remove the black tape connecting the battery to the motherboard.

  3. Pinch the sides of the white resistor to safely remove it without damaging it or yourself.
    • Pinch the sides of the white resistor to safely remove it without damaging it or yourself.

  4. Kit di riparazione per Android

    Un nuovo schermo o una nuova batteria sono ad un kit di distanza.

    Acquista ora

    Kit di riparazione per Android

    Un nuovo schermo o una nuova batteria sono ad un kit di distanza.

    Acquista ora
  5. Remove battery from adhesive. Remove battery from adhesive.
    • Remove battery from adhesive.

  6. Use a Phillips #000 screwdriver to remove the screws around the perimeter of the motherboard.
    • Use a Phillips #000 screwdriver to remove the screws around the perimeter of the motherboard.

  7. Disconnect the resistor attached to the orange tab by sliding the tail out. Pry open the orange tab near the top left corner.
    • Disconnect the resistor attached to the orange tab by sliding the tail out.

    • Pry open the orange tab near the top left corner.

  8. Disconnect all cords, wires, and resistors from the motherboard using tweezers. Disconnect all cords, wires, and resistors from the motherboard using tweezers. Disconnect all cords, wires, and resistors from the motherboard using tweezers.
    • Disconnect all cords, wires, and resistors from the motherboard using tweezers.

  9. Continue to disconnect all resistors attached from the motherboard, using tweezers. Continue to disconnect all resistors attached from the motherboard, using tweezers. Continue to disconnect all resistors attached from the motherboard, using tweezers.
    • Continue to disconnect all resistors attached from the motherboard, using tweezers.

  10. Gently lift motherboard out.
    • Gently lift motherboard out.

    • The edges may be sharp.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

John

Membro da: 29/01/2015

546 Reputation

3 Guide realizzate

Team

UWT Liner: Group 3 Membro di UWT Liner: Group 3

Community

5 Membri

3 Guide realizzate

I need main ic part num A1-810 iconia I need main ic

mehwish - Replica

It was damage because high voltage

mehwish - Replica

I need main ic

mehwish - Replica

Can you replace the mini USB charger port without replacing entire motherboard and losing data?

theblackfox2 - Replica

Hi there i need acer lconia A3 main bord how much it will cost me ?

Muhammad - Replica

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 13

All Time: 4,689