Acer Chromebook R11 CB5-132T-C1LK LED BoardReplacement

Introduzione

If the LED lights of your Acer Chromebook R11 CB5-132T-C1LK are not functioning properly, this guide will detail how to access and remove the LED board for replacement.

Cosa ti serve

Passo 1 Bottom Panel

Acer Chromebook R11 CB5-132T-C1LK LED BoardReplacement, Bottom Panel: passo 1, immagine 1 di 1

Using a Phillips screwdriver, remove all eleven 7.0 mm screws from the bottom of the Chromebook.

Modifica

Passo 2

Find the seam along the edge of the device.
Wedge a finger into the groove and separate the panel from the device. If necessary, use a spudger.
The panel will still be connected to the device by internal wiring, so pull it off with some caution. It is best to flip the panel to the side once the seam has been broken.

Modifica

Passo 3 LED Board

Acer Chromebook R11 CB5-132T-C1LK LED BoardReplacement, LED Board: passo 3, immagine 1 di 2

Acer Chromebook R11 CB5-132T-C1LK LED BoardReplacement, LED Board: passo 3, immagine 2 di 2

Attrezzo utilizzato in questo passaggio:

Tweezers

$4.99

Compra

Use the flat end of the spudger to lift the retaining flap on the LED board ZIF connector.
Pull the ribbon cable from the ZIF connector using tweezers.