Aggiusta la tua roba Diritto alla Riparazione Store

Acer Chromebook C720-2848 Screen Replacement

Scritto Da: Cory Provost (e 6 altri collaboratori)
  • Commenti: 0
  • Preferiti: 1
  • Completamenti: 3

Difficoltà

Moderato

Passi

5

Tempo Necessario

5 minuti

Sezioni

1

Contrassegni

1

Needs Better Images

Necessarie Immagini Migliori

Delle foto più belle renderanno migliore questa guida. Contribuisci scattando, modificando o caricando immagini nuove!

Introduzione

This guide instructs the reader how to disassemble, extract, replace, and reassemble the LCD monitor for an Acer Chomebook C720-2848.

Strumenti

Acquista questi strumenti

Parti

Nessuna parte specificata.

  1. Insert a metal spudger around the inner side of the screens plastic perimeter. Move along the perimeter while leveraging to pop the faceplate out like so.

    • Insert a metal spudger around the inner side of the screens plastic perimeter.

    • Move along the perimeter while leveraging to pop the faceplate out like so.

    Traduci

  2. Remove the faceplate's bottom hinges that connect to the body of the device with the metal spudger. This will free the plastic perimeter, which may now be removed. Remove the faceplate's bottom hinges that connect to the body of the device with the metal spudger. This will free the plastic perimeter, which may now be removed.

    • Remove the faceplate's bottom hinges that connect to the body of the device with the metal spudger. This will free the plastic perimeter, which may now be removed.

    Traduci

  4. Use a Phillips #0 screwdriver to remove the 6 screws in these circled locations.

    • Use a Phillips #0 screwdriver to remove the 6 screws in these circled locations.

    Traduci

  5. Reposition so the screen will lay flat on the keyboard of the laptop.

    • Reposition so the screen will lay flat on the keyboard of the laptop.

    Traduci

  6. Locate the bar code adhesion strip at the base of the screen, and then peel it back carefully. Once peeled back the plug-in will come free. Locate the bar code adhesion strip at the base of the screen, and then peel it back carefully. Once peeled back the plug-in will come free.

    • Locate the bar code adhesion strip at the base of the screen, and then peel it back carefully. Once peeled back the plug-in will come free.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

Autore

con 6 altri collaboratori

Cory Provost

Membro da: 27/09/2017

191 Reputazione

1 Guida realizzata

Distintivi: 8

+5 altri distintivi

Team

USF Tampa, Team S9-G3, Remmell Fall 2017 Membro di USF Tampa, Team S9-G3, Remmell Fall 2017

USFT-REMMELL-F17S9G3

4 Membri

9 Guide realizzate

0 Commenti

Aggiungi un commento

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 14

Tutti i Tempi: 1,263