Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a Phillips #0 screwdriver to unscrew the eight 4mm screws.
-
Use a Phillips #0 screwdriver to unscrew the two 7mm screws.
-
Remove the cover of the device by prying up from one of the edges with a spudger or plastic opening tool.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a spudger to disconnect the speaker connector from the bottom of the sound card. The connector should slide out toward the left speaker's housing.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a spudger to carefully disconnect the ribbon connector from the right side of the sound card. The connector should slide out toward the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a Phillips #0 screwdriver to unscrew the two 4mm screws.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Slide the sound card towards the motherboard until the headphone jack is out of its hole on the side of the laptop.
-
Lift the sound card directly up from the laptop to remove it.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.