Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a Phillips #0 screwdriver to unscrew the eight 4mm screws.
-
Use a Phillips #0 screwdriver to unscrew the two 7mm screws.
-
Remove the cover of the device by prying up from one of the edges with a spudger or plastic opening tool.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a Phillips #0 screwdriver to unscrew the four 5.5mm screws from the screen brackets.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use tweezers to detach the webcam connectors from the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Disconnect the display panel connector from the motherboard. The connector should slide out away from the motherboard.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
To remove the lid from the laptop, pivot each end on the hinge and lift the rest of the laptop up and away from the lid.
-
Remove the display assembly from the laptop case.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.