Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a Phillips #0 screwdriver to unscrew the eight 4mm screws.
-
Use a Phillips #0 screwdriver to unscrew the two 7mm screws.
-
Remove the cover of the device by prying up from one of the edges with a spudger or plastic opening tool.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a spudger to disconnect the battery's connector from the motherboard. The connector should slide out toward the battery.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a Phillips #0 screwdriver to unscrew the two 5.5mm screws from the battery housing.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
While lifting the connector side of the battery, slide the battery towards the center of the laptop.
-
Remove the battery from the laptop.
-
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.