Salta al contenuto principale

Introduzione

The keyboard may be easily replaced if a key or keys no longer works. It is accessible without removing the back cover of the computer.

  1. Use the pointed end of the spudger to slide the battery lock until the battery pops loose.
    • Use the pointed end of the spudger to slide the battery lock until the battery pops loose.

  2. Slide the battery out of the battery slot. Slide the battery out of the battery slot.
    • Slide the battery out of the battery slot.

  3. Remove the two 6mm PH1 screws from the bottom of the laptop.
    • Remove the two 6mm PH1 screws from the bottom of the laptop.

  4. Use the spudger, push the two tabs, located in the battery slot, through their slots to release the keyboard.
    • Use the spudger, push the two tabs, located in the battery slot, through their slots to release the keyboard.

    • Do this with the computer slightly open for ease.

  5. Open the laptop. Start top of the keyboard and use the opening tool to pop the remaining tabs around the keyboard loose.
    • Open the laptop.

    • Start top of the keyboard and use the opening tool to pop the remaining tabs around the keyboard loose.

    • The keyboard can be flipped onto its face once removed.

  6. Use the spudger and slide the grey tabs on either side of the keyboard wires away from the white plastic.
    • Use the spudger and slide the grey tabs on either side of the keyboard wires away from the white plastic.

  7. Disconnect the keyboard by pulling the blue tape on the wire strip.
    • Disconnect the keyboard by pulling the blue tape on the wire strip.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 79