Salta al contenuto principale

Introduzione

In this guide the back cover, and RAM card will be removed so that a new RAM card can be inserted.

Parti

Nessuna parte specificata.

  1. Remove the storage tray on the left edge of the device.
    • Remove the storage tray on the left edge of the device.

  2. Use a Phillips #0 screwdriver to remove seventeen 7mm screws from the lower case.
    • Use a Phillips #0 screwdriver to remove seventeen 7mm screws from the lower case.

  3. Skip the upgrade.

    Ottieni $10 di sconto su $50 con
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  4. Lift up the back case to remove it. Lift up the back case to remove it.
    • Lift up the back case to remove it.

  5. Locate the RAM slot and push outwards on the metal tabs to release the RAM card. Locate the RAM slot and push outwards on the metal tabs to release the RAM card.
    • Locate the RAM slot and push outwards on the metal tabs to release the RAM card.

  6. Carefully slide the RAM card out of its slot, and insert the replacement card
    • Carefully slide the RAM card out of its slot, and insert the replacement card

Conclusione

To reassemble your device, follow these instructions in reverse order.

Noah lishman

Membro da: 20/09/2017

101 Reputazione

1 Guida realizzata

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 3

Tutti i Tempi: 111