Parti

Nessuna parte richiesta.

  1. Flipping your laptop over, the RAM is located on the lower half of the laptop
    • Flipping your laptop over, the RAM is located on the lower half of the laptop

    • Remove the two screws shown on diagram using a Phillips #00 screwdriver

    • Use the opening tool to help lift and remove the lower case

  2. Remove the screw that is securing the RAM chip in place
    • Remove the screw that is securing the RAM chip in place

    • After removing the screw, push the tabs on the sides of the cards out. This will allow the RAM card to pop up so you can carefully pull it out. Repeat this for the second RAM card under it.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Erica Gomes

Membro da: 18/03/2018

470 Reputazione

3 Guide realizzate

Team

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 21

Tutti i Tempi: 171