Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate and remove the two 5.3 mm Phillips #1 screws holding the back panel in place.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use a spudger to pry the panel up from the laptop case and remove it.
-
The laptop should now be open with the RAM and wifi chip now accessible.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the 5 mm Phillips #1 screw holding the wifi chip in place.
-
Carefully remove the wifi chip.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the 8, 9 mm Phillips #1 screws holding the panel in place.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Flip the computer over, and with a spudger, remove the black panel directly below the keyboard.
-
Remove the panel and flip it up onto the keyboard
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
With the panel removed, locate the USB port ribbon cable connecting to the motherboard.
-
Carefully disconnect the ribbon cable.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unscrew the 5 mm Phillips #1 screw holding the USB ports in place.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
The USB ports can now be removed from the laptop.
-
Annulla: non ho completato questa guida.
Altre 7 persone hanno completato questa guida.