Salta al contenuto principale

Parti

Nessuna parte specificata.

  1. Remove the back panel by unscrewing all marked 3mm screws with a T6 Torx screwdriver. Remove these screws with a T6 Torx screwdriver, but note that these feet screws are 4mm in length.
    • Remove the back panel by unscrewing all marked 3mm screws with a T6 Torx screwdriver.

    • Remove these screws with a T6 Torx screwdriver, but note that these feet screws are 4mm in length.

  2. Unscrew the marked 2mm screws with a Phillips #01 screwdriver. Remove the fan by disconnecting the marked tabs.
    • Unscrew the marked 2mm screws with a Phillips #01 screwdriver.

    • Remove the fan by disconnecting the marked tabs.

  3. Batterie per PC portatili

    Una soluzione semplice per un grande aumento di potenza.

    Acquista ora

    Batterie per PC portatili

    Una soluzione semplice per un grande aumento di potenza.

    Acquista ora
  4. Remove the marked 2mm screw with a Phillips #01 screwdriver.
    • Remove the marked 2mm screw with a Phillips #01 screwdriver.

  5. Remove the hard drive by pulling it away horizontally from its connection.
    • Remove the hard drive by pulling it away horizontally from its connection.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Nicholas Wise

Membro da: 14/02/2018

595 Reputazione

5 Guide realizzate

Team

USF Tampa, Team S2-G6, Eyestone Spring 2018 Membro di USF Tampa, Team S2-G6, Eyestone Spring 2018

USFT-EYESTONE-S18S2G6

3 Membri

5 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 3

Ultimi 7 Giorni: 14

Ultimi 30 Giorni: 63

Tutti i Tempi: 538