Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
The fan often needs replacement if the device is overheating or making loud noises while running. Some common tools will be needed for this replacement, such as a T6 Torx screwdriver and a Phillips #01 screwdriver. To determine if the fan needs to be replaced, please refer to this device's troubleshooting page.
Cosa ti serve
-
-
Remove the back panel by unscrewing all marked 3mm screws with a T6 Torx screwdriver.
-
Remove these screws with a T6 Torx screwdriver, but note that these feet screws are 4mm in length.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.