Introduzione

The Wifi card allows the user to connect to a wireless network. This guide will show you how to remove and replace the Wifi card in this laptop.

Parti

Nessuna parte richiesta.

  1. Remove the ten 7mm Phillips #0 screws from the bottom. Remove the ten 7mm Phillips #0 screws from the bottom.
    • Remove the ten 7mm Phillips #0 screws from the bottom.

  2. Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release. Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release.
    • Insert a plastic opening tool under the bottom cover and slid it around the perimeter until all of the clips release.

  3. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  4. Disconnect the two antenna cables from the Wi-Fi card. Disconnect the two antenna cables from the Wi-Fi card.
    • Disconnect the two antenna cables from the Wi-Fi card.

  5. Remove the single 5mm Phillips #0 screw from the Wi-Fi card. Remove the single 5mm Phillips #0 screw from the Wi-Fi card.
    • Remove the single 5mm Phillips #0 screw from the Wi-Fi card.

  6. Slide out the Wifi card from its slot by pulling parallel to the board. Slide out the Wifi card from its slot by pulling parallel to the board.
    • Slide out the Wifi card from its slot by pulling parallel to the board.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Joseph

Membro da: 25/01/2018

589 Reputazione

6 Guide realizzate

Team

USF Tampa, Team S20-G1, Passmore Spring 2018 Membro di USF Tampa, Team S20-G1, Passmore Spring 2018

USFT-PASSMORE-S18S20G1

3 Membri

6 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 15

Tutti i Tempi: 149