Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove all 18 marked screws (2.12 mm) using a Phillips #1 Screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Use the spudger to slowly work your way around the perimeter starting at the marked location to pop the bottom cover off.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the 1 marked screw (3.3 mm) holding the battery in place using a Phillips #1 Screwdriver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unplug the marked plug from the motherboard and this will complete the removal of the battery.
-
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.