Parti

Nessuna parte richiesta.

Panoramica Video

  1. Grab a spudger and work your way around the outer edge of the screen
    • Grab a spudger and work your way around the outer edge of the screen

    • Lean the screen all the way back to remove the plastic frame from the hinges at the bottom

    Aggiungi Commento

  2. Unscrew the 4 screws around the edge of the screen
    • Unscrew the 4 screws around the edge of the screen

    • Lean the screen all the way forward on to the keyboard

    Aggiungi Commento

  3. Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK al checkout
    Spedizione gratuita per ordini superiori a $20
    Usa il codice BLUEANDBLACK
    • Peal up the sticky tape next to the screen connector

    • Pull the connector down carefully away from the screen and disconnect it

    Aggiungi Commento

    • connect the new screen and screw back in place

    • Turn on the screen to test before putting the screen frame back on

    • Tilt the screen all the way back and push the frame back on hinges 1st.

    • Finally lean the laptop on its edge and clip the back on the hinges back in place.

    Aggiungi Commento

Linea Traguardo

Nick Myers

Membro da: 15/04/2018

329 Reputazione

2 Guide realizzate

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 5

Tutti i Tempi: 39