Acer Aspire E5-721-64T8 Hard Drive Replacement

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Introduzione

If your laptop wont boot, it may be because of a corrupted hard drive. This simple guide will show you how to remove the hard drive for this laptop. Be sure to fallow the steps in order. In the end you will be able to remove and replace the current hard drive.

Cosa ti serve

Passo 1 Battery

Acer Aspire E5-721-64T8 Hard Drive Replacement, Battery: passo 1, immagine 1 di 1

Remove the twenty-five 6mm Phillips #0 screws from the bottom panel of the laptop.

Traduci

Passo 2

Using the plastic opening tool, lift up on the side opposite of the Ethernet connector.
With the plastic opening tool under the bottom panel, work your way around the perimeter until the panel separates.

Traduci

Passo 3

Remove the two 6mm Phillips #0 screws from the battery.

Traduci

Passo 4

Disconnect the battery from the motherboard.
Pull the battery up and out of the laptop.

Traduci

Passo 5 Hard Drive

Acer Aspire E5-721-64T8 Hard Drive Replacement, Hard Drive: passo 5, immagine 1 di 1

Remove the four 3mm Phillips #0 screws from the hard drive.

Traduci

Passo 6

Use a spudger to flip up the retaining flap on the hard drive ribbon cable ZIF socket.
Pull the ribbon cable out of the ZIF connector and remove the hard drive from the laptop.