1. On the back of the laptop, there is a sliding lock. Push the slider and the battery will unlock
    • On the back of the laptop, there is a sliding lock. Push the slider and the battery will unlock

  2. Pull battery to remove.
    • Pull battery to remove.

    • Remove the 1 screw just above the battery with a Phillips #1 screwdriver.

    • Pull the Optical Drive out

    • Remove the 17 Phillips #1 screws remaining on the back side of the laptop

    • Flip over the laptop, Using the spudger separate the body of the keyboard from the base of the laptop.

    • Carefully lift the keyboard and disconnect the 3 ribbon style connectors from the computers boards.

    • Disconnect the cord from the fan

    • Remove the 2 #1 Phillips screws

    • now the fan can be pulled from the laptop

    • Disconnect the 2 plugs remaining on the computer

    • Remove the last 2 #1 Philips screws from the body

    • Remove the 2 #1 Phillips screws, then slide the metal cover back and away

    • Remove the board from the laptop body, flip over for access to the ram

    • Press down on the spring clips on either side of the ram, It will unlock and can be removed

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aaron

Membro da: 19/03/2018

511 Reputazione

5 Guide realizzate

Team

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 5

Tutti i Tempi: 64