Aggiusta la tua roba Comunità Store

Acer Aspire 7736Z-4809 CPU Fan Replacement

Introduzione

To remove the CPU cooling fan for replacement, we must disassemble the laptop and deal with sensitive electrical components. Please carefully follow these procedures.

Cosa ti serve

  1. Acer Aspire 7736Z-4809 CPU Fan Replacement, Acer Aspire 7736Z-4809 Repair Preparation: passo 1, immagine 1 di 1

    • Unplug and power off the laptop.

    • If the battery is still connected to the laptop, remove the battery.

    Modifica

  2. Acer Aspire 7736Z-4809 CPU Fan Replacement: passo 2, immagine 1 di 1

    • Flip over the laptop so that the back panel of the laptop is facing up.

    Modifica

  3. Acer Aspire 7736Z-4809 CPU Fan Replacement, Back Panel: passo 3, immagine 1 di 2 Acer Aspire 7736Z-4809 CPU Fan Replacement, Back Panel: passo 3, immagine 2 di 2

    • Use the Phillips #1 screwdriver to remove the eight 6.5 mm Phillips #1 screws.

    • Only the four screws in the center are removable, the four along the edges are held in by rivets but can be loosened.

    Modifica

  5. Acer Aspire 7736Z-4809 CPU Fan Replacement: passo 4, immagine 1 di 3 Acer Aspire 7736Z-4809 CPU Fan Replacement: passo 4, immagine 2 di 3 Acer Aspire 7736Z-4809 CPU Fan Replacement: passo 4, immagine 3 di 3

    • Remove the back panel of the laptop.

    Modifica

  6. Acer Aspire 7736Z-4809 CPU Fan Replacement: passo 5, immagine 1 di 1

    • Connect a grounding cord to a metal interface on the laptop.

    • Ground the laptop to prevent static electricity from damaging the electrical components inside the laptop.

    Modifica

  7. Acer Aspire 7736Z-4809 CPU Fan Replacement, CPU Fan: passo 6, immagine 1 di 3 Acer Aspire 7736Z-4809 CPU Fan Replacement, CPU Fan: passo 6, immagine 2 di 3 Acer Aspire 7736Z-4809 CPU Fan Replacement, CPU Fan: passo 6, immagine 3 di 3

    • Use tweezers to remove the fan cable from its slot.

    • The cables consist of red, black, and yellow wires.

    Modifica

  8. Acer Aspire 7736Z-4809 CPU Fan Replacement: passo 7, immagine 1 di 2 Acer Aspire 7736Z-4809 CPU Fan Replacement: passo 7, immagine 2 di 2

    • Use the Phillips #1 screwdriver to unscrew the four Phillips #1 screws that connect the cooling fan from the panel.

    • These screws are held in the unit via springs. You cannot remove them. They can only be loosened.

    Modifica

  9. Acer Aspire 7736Z-4809 CPU Fan Replacement: passo 8, immagine 1 di 3 Acer Aspire 7736Z-4809 CPU Fan Replacement: passo 8, immagine 2 di 3 Acer Aspire 7736Z-4809 CPU Fan Replacement: passo 8, immagine 3 di 3

    • Carefully remove the cooling fan from the motherboard.

    • Slightly lift up the fan, gradually slide it towards you and then fully remove it from the case.

    Modifica

  10. Acer Aspire 7736Z-4809 CPU Fan Replacement: passo 9, immagine 1 di 1

    • Install the modified or new cooling fan.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 2 persone hanno completato questa guida.

Autore

con 4 altri collaboratori

Pnithan Jantarakolica

Membro da: 09/22/16

1.153 Reputazione

10 Guide realizzate

Distintivi: 10

+7 altri distintivi

Team

UC Davis, Team 2-4, Oliver Fall 2016 Membro di UC Davis, Team 2-4, Oliver Fall 2016

UCD-OLIVER-F16S2G4

5 Membri

10 Guide realizzate

Un commento

You’ll need some thermal compound when reinstalling for the heat syncs under the copper tube.

Minks - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 8

Tutti i Tempi: 786