Introduzione

Removal of the hard drive is easy, but just be careful not to knock, jerk or drop it in the process as it's a delicate electromechanical device.

Parti

Nessuna parte richiesta.

  1. Move the battery catch to the "unlocked" position.
    • Move the battery catch to the "unlocked" position.

    • Pull back the second spring-loaded battery catch until the battery pops up.

    • Remove the battery.

    Aggiungi Commento

  2. Turn the notebook around to face you.
    • Turn the notebook around to face you.

    • There are two Phillips #00 screws securing the cover panel to the rest of the notebook. Remove these screws.

    Aggiungi Commento

    • Use a spudger to release the panel from the plastic retaining clips keeping it in place.

    • Do not apply too much force, or you may break the clips.

    • Remove the panel and set it aside.

    Aggiungi Commento

    • Unscrew the Phillips #00 screw which retains the hard drive in place.

    • Gently slide the hard drive to the left in order to disengage the SATA connectors.

    • It may be quite stiff, in which case you can ease the hard drive out of the SATA connectors by inserting a spudger between the hard drive and the connector block.

    • Lift the drive out of the notebook.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 14 persone hanno completato questa guida.

Skylar MacDonald

Membro da: 04/12/2011

1.696 Reputazione

5 Guide realizzate

Great guide except for the missing screw sizes. Does anybody know the screw sizes?

patrickscott - Replica

I have this laptop with a bad HDD, it was a Toshiba 640 GB , 5400 RPM drive.

I like to know if this laptop supports 7200 RPM drives

Also, does this laptop support an SSD drive ?

Shahzaan - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 11

Ultimi 7 Giorni: 57

Ultimi 30 Giorni: 168

Tutti i Tempi: 35,738