Introduzione

Upgrade or replace RAM.

Remove the screws on the large panel.
  • Remove the screws on the large panel.

  • Lift up the panel.

Aggiungi Commento

The RAM slots are located in the corner opposite to the cooling fan.
  • The RAM slots are located in the corner opposite to the cooling fan.

  • To remove existing RAM cards: there are clips holding the sides of each card. Simultaneously spread both right and left clip and the card will pop upward. Then it can easily be pulled out.

  • Slide in the RAM at a 45 degree angle.

  • Press down on the RAM until it snaps into place.

  • A good amount of pressure is needed to snap it in place.

  • Install the RAM in the left (lower) slot before installing RAM in the right (upper) slot

Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 7 persone hanno completato questa guida.

Brad Rollinson

Membro da: 29/09/2010

1.089 Reputazione

8 Guide realizzate

Team

Cal Poly, Team 14-39, Forte Fall 2010 Membro di Cal Poly, Team 14-39, Forte Fall 2010

CPSU-FORTE-F10S14G39

5 Membri

9 Guide realizzate

being a novice ram replacement i found this to be exactly what i needed to know thankyou very much.

bruce johnson - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 25

Tutti i Tempi: 14,594