Introduzione

This guide demonstrates how to replace or upgrade the Hard Drive of an Acer Aspire 4520-5464 laptop.

Parti

Nessuna parte richiesta.

  1. Shut down the computer and disconnect all external devices and cables.
    • Shut down the computer and disconnect all external devices and cables.

    • Flip the computer over.

    Aggiungi Commento

  2. Ensure that the battery compartment lock tab is in the unlocked position.
    • Ensure that the battery compartment lock tab is in the unlocked position.

    • Slide the sliding black tab away from the battery compartment.

    • The inside edge of the battery should be released, causing it to slightly pop out of the compartment.

    Aggiungi Commento

    • Grasp the inside edge of the battery and lift to fully detach the battery from the computer.

    Aggiungi Commento

    • Remove the seven 2mm Phillips #1 screws from the largest panel on the back of the laptop

    • Lift up the panel from the indent located on the right side.

    Aggiungi Commento

    • Remove the two 0.5mm Phillips #1 black screws left of the Hard Drive.

    • Remove the two 0.5mm Phillips #1 silver on top of the Hard Drive.

    • Lift up and remove the hard drive bracket by the plastic tab on top of the hard drive.

    Aggiungi Commento

    • Remove the hard drive from the device.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 5

Ultimi 30 Giorni: 11

Tutti i Tempi: 161