Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

Acer AL1916 Outer Case Replacement

Introduzione

The outer casing protects the internals of the monitor.

Cosa ti serve

  1. Acer AL1916 Outer Case Replacement, Stand: passo 1, immagine 1 di 1

    • Lay the monitor on a flat surface so that the back is facing up.

    Traduci

  2. Acer AL1916 Outer Case Replacement: passo 2, immagine 1 di 2 Acer AL1916 Outer Case Replacement: passo 2, immagine 2 di 2

    • Grab the hinge cover with both hands on either side of the stand.

    • Squeeze inwards with your thumbs and fingers and lift up to remove the hinge cover.

    Traduci

  4. Acer AL1916 Outer Case Replacement: passo 3, immagine 1 di 2 Acer AL1916 Outer Case Replacement: passo 3, immagine 2 di 2

    • Remove the four 12.1 mm Phillips #2 screws that hold the stand to the monitor.

    • Support the monitor while removing the screws to prevent the monitor from falling.

    • Lift up to detach the stand.

    Traduci

  5. Acer AL1916 Outer Case Replacement, Outer Case: passo 4, immagine 1 di 2 Acer AL1916 Outer Case Replacement, Outer Case: passo 4, immagine 2 di 2

    • Remove the five 9.5 mm Phillips #2 screws located around the perimeter of the monitor.

    Traduci

  6. Acer AL1916 Outer Case Replacement: passo 5, immagine 1 di 3 Acer AL1916 Outer Case Replacement: passo 5, immagine 2 di 3 Acer AL1916 Outer Case Replacement: passo 5, immagine 3 di 3

    • Starting at the corner of the monitor, wedge the small plastic opening tool between the back cover and the display bezel.

    • Tilt the plastic opening tool up to separate the back cover from the display bezel.

    • Continue around the perimeter of the monitor until the display bezel comes off.

    • A reasonable amount of force is necessary to detach the back cover from the display bezel.

    Traduci

  7. Acer AL1916 Outer Case Replacement: passo 6, immagine 1 di 2 Acer AL1916 Outer Case Replacement: passo 6, immagine 2 di 2

    • Reposition the monitor so that the back is facing up.

    • Grab the corners of the monitor and jiggle them upwards to detach the back cover from the inside of the monitor.

    • Lift the back cover up.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 5 altri collaboratori

Keith

Membro da: 10/06/11

336 Reputazione

4 Guide realizzate

Distintivi: 13

+10 altri distintivi

Team

Cal Poly, Team 20-26, Maness Fall 2011 Membro di Cal Poly, Team 20-26, Maness Fall 2011

CPSU-MANESS-F11S20G26

4 Membri

14 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 2

Tutti i Tempi: 1,230