Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.
Introduzione
This guide will require you to disassemble the rear and side panels of the printer in order to access the circuit board.
Cosa ti serve
-
-
Remove the top hinged panel by taking out the pins at the bottom of this panel.
-
-
-
Remove the front panel by gently moving the holes on the panel from the pegs attached to the main printer body one at a time. Be sure to remove the entire front panel and not just the flap on the paper tray.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulla: non ho completato questa guida.
Altre 3 persone hanno completato questa guida.