Salta al contenuto principale

AXIOO Pico M1110 PJM Keyboard Replacement

Cosa ti serve

  1. AXIOO Pico M1110 PJM Keyboard Replacement, Underside: passo 1, immagine 1 di 1
    • Identify the battery locker.

    • Set the righthand locker to unlock.

    • Pull the battery while setting the lefthand locker to unlock.

  2. AXIOO Pico M1110 PJM Keyboard Replacement: passo 2, immagine 1 di 1
    • Remove the battery.

  3. AXIOO Pico M1110 PJM Keyboard Replacement, Keyboard: passo 3, immagine 1 di 3 AXIOO Pico M1110 PJM Keyboard Replacement, Keyboard: passo 3, immagine 2 di 3 AXIOO Pico M1110 PJM Keyboard Replacement, Keyboard: passo 3, immagine 3 di 3
    Attrezzo utilizzato in questo passaggio:
    Flathead 3/32" or 2.5 mm Screwdriver
    $5.49
    Compra
    • Identify these:

    • 4 keyboard clipper

    • Remove the keyboard clipper by gently twisting them till pops out.

    • Use a small flathead screwdriver to twist easier.

    • Lift the keyboard up by pivoting on the bottom side.

    • Don't lift it too high up, because beneath it there's the keyboard ZIF connector still connected; refer to the next step.

  4. AXIOO Pico M1110 PJM Keyboard Replacement: passo 4, immagine 1 di 3 AXIOO Pico M1110 PJM Keyboard Replacement: passo 4, immagine 2 di 3 AXIOO Pico M1110 PJM Keyboard Replacement: passo 4, immagine 3 di 3
    Attrezzo utilizzato in questo passaggio:
    Tweezers
    $4.99
    Compra
    • Identify this:

    • The ZIF connector locker

    • Gently pull the locker out.

    • Use a pair of tweezers to make it easier to pull it out.

    • Don't forget the other side too!

    • Remove the ZIF connector.

    • Remove the keyboard.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Cakra Diaz

Membro da: 07/26/17

999 Reputazione

6 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 4

Tutti i Tempi: 562