Salta al contenuto principale

Introduzione

This guide's focus is on replacing the Wi-Fi card of a wireless desktop computer. Please follow the directions below to accomplish this result.

Ricambi

Nessuna parte specificata.

  1. Place the laptop upside down so that the bottom panel is facing upwards.
    • Place the laptop upside down so that the bottom panel is facing upwards.

  2. Unscrew the following 10 screws
    • Unscrew the following 10 screws

    • Eight 5 mm Phillips head screws

    • Two 10 mm Phillips head screws

  3. Carefully peel the panel off of the bottom of the laptop.
    • Carefully peel the panel off of the bottom of the laptop.

  4. Remove the one 3 mm Phillips head screw holding the Wi-Fi card in place.
    • Remove the one 3 mm Phillips head screw holding the Wi-Fi card in place.

  5. Carefully slide the card out of its connection port by pulling it outward.
    • Carefully slide the card out of its connection port by pulling it outward.

  6. Remove the black and white antenna cable connector wires by carefully pulling upwards on them.
    • Remove the black and white antenna cable connector wires by carefully pulling upwards on them.

    • Note that the black wire connects to "Main" and the white wire connects to "Aux".

Conclusione

To reassemble your device, follow these instructions in reverse order.

Keith Rachels

Membro da: 04/03/2016

595 Reputazione

5 Guide realizzate

Team

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 6

Tutti i Tempi: 446