Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Place the laptop upside down so that the bottom panel is facing upwards.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Unscrew the following 10 screws
-
Eight 5 mm Phillips head screws
-
Two 10 mm Phillips head screws
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully peel the panel off of the bottom of the laptop.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the following 4 screws and piece of tape.
-
Three 3 mm Phillips head screws
-
One 5 mm Phillips head screws
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully disconnect the hard drive from its port by sliding it to right.
-
Annulla: non ho completato questa guida.
Un'altra persona ha completato questa guida.