Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove all 10 Phillips screws on the backplate.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Carefully remove the backplate using the plastic opening tool.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
Attrezzo utilizzato in questo passaggio:Tweezers$4.99-
Next, lift up the battery connector from the laptop in the upper left side of the battery, using tweezers or spudger.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the six screws holding in the battery with a Phillips #0 screwdriver.
-
Once battery is lifted out and removed, proper dispose of the old battery.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the screw holding the Power chip in place and remove it using a Phillips head #0 screw driver.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Locate the ribbon connector connecting the power chip to the mother board.
-
Simply lift up the black component and the ribbon connector should be released, then the power chip should pop out easily.
-