Introduzione

Over time a laptop keys will be pushed a good amount, therefore it is no surprise that certain keys begin to stop working. Keyboard keys are easy to find on the market, and once a replacement key is bought follow these steps to replace that certain key.

  1. First, insert the opening tool, between the key cap and the hinge and push up gently. The key should pop out easily.
    • First, insert the opening tool, between the key cap and the hinge and push up gently.

    • The key should pop out easily.

  2. Spedizione gratuita per tutti gli ordini superiori a 100 US$ o contenenti un Kit Attrezzi Pro Tech!

    Sfoglia il Nostro Negozio
  3. Place, the flat head screwdriver between the two parts of the plastic hinge, and turn it a little so the first part pops out. You can start on either side, either the right or the left it does not matter, just make sure to do both sides.
    • Place, the flat head screwdriver between the two parts of the plastic hinge, and turn it a little so the first part pops out.

    • You can start on either side, either the right or the left it does not matter, just make sure to do both sides.

  4. Next remove the last plastic piece from the keyboard, and properly dispose of all three parts. Next remove the last plastic piece from the keyboard, and properly dispose of all three parts.
    • Next remove the last plastic piece from the keyboard, and properly dispose of all three parts.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Scott Santiago

Membro da: 17/10/2017

526 Reputazione

5 Guide realizzate

Team

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 1

Ultimi 30 Giorni: 9

Tutti i Tempi: 167