Salta al contenuto principale

3DO FZ-1 Disassembly Guide

Cosa ti serve

  1. 3DO FZ-1 Disassembly Guide, Lets Begin!: passo 1, immagine 1 di 3 3DO FZ-1 Disassembly Guide, Lets Begin!: passo 1, immagine 2 di 3 3DO FZ-1 Disassembly Guide, Lets Begin!: passo 1, immagine 3 di 3
    • Here we have the front view of the FZ-1 3DO.

    • Note the ports on the back of the unit. The FZ-1 comes with RF, S-Video, and Composite Outputs, as well as a expansion port on the back of the unit.

    • A larger 2nd expansion slot can be found on the right side of the unit.

  2. 3DO FZ-1 Disassembly Guide, Outer Casing: passo 2, immagine 1 di 1
    • Flip the unit over, so that the bottom side of the case is facing up towards you, exposing the four screws casing screws.

    • Remove the four #2 Phillips Screws from the casing.

    • After the screws are removed, flip the unit back over while holding the top and bottom pieces of the case together.

  3. 3DO FZ-1 Disassembly Guide, Top Casing: passo 3, immagine 1 di 1
    • Remove the top portion of the case to expose the internal components.

  4. 3DO FZ-1 Disassembly Guide, Disc Drive: passo 4, immagine 1 di 3 3DO FZ-1 Disassembly Guide, Disc Drive: passo 4, immagine 2 di 3 3DO FZ-1 Disassembly Guide, Disc Drive: passo 4, immagine 3 di 3
    • Remove the 2 #1 Phillips Screws from the back of the Disc Drive Shield.

    • Using a Spudger, carefully pry up the four metal tabs to remove the disc drive cover.

    • Remove the 4 #2 Phillips Screws.

    • Remove the disc drive shield, and the two bars you just unscrewed.

  5. 3DO FZ-1 Disassembly Guide: passo 5, immagine 1 di 1
    • Remove the 5 #1 Phillips Screws holding the CD Drive to the motherboard.

    • Carefully unplug the two ribbon cables connecting the CD drive to the motherboard.

    • You can now safely remove the CD drive from the case.

  6. 3DO FZ-1 Disassembly Guide: passo 6, immagine 1 di 2 3DO FZ-1 Disassembly Guide: passo 6, immagine 2 di 2
    • Remove the 11 #1 Phillips Screws connecting the metal shield to the motherboard.

    • Remove the metal shield.

    • Remove the metal cover from the expansion port.

  7. 3DO FZ-1 Disassembly Guide: passo 7, immagine 1 di 1
    • Remove the #1 Phillips Screw from back port cover, and then remove the cover.

  8. 3DO FZ-1 Disassembly Guide: passo 8, immagine 1 di 2 3DO FZ-1 Disassembly Guide: passo 8, immagine 2 di 2
    • Remove the plastic cover, power and eject buttons found at the front end of the unit.

  9. 3DO FZ-1 Disassembly Guide: passo 9, immagine 1 di 2 3DO FZ-1 Disassembly Guide: passo 9, immagine 2 di 2
    • Unplug the power and fan cables from the motherboard.

    • Remove the 2 #2 Phillips Screws holding the power supply to the case.

    • The electric screwdriver comes in handy loosening the PSU screws on the FZ-1.

    • Remove the power supply and fan from the case.

  10. 3DO FZ-1 Disassembly Guide: passo 10, immagine 1 di 1
    • Unplug the ribbon cable connecting the motherboard to the controller port board.

    • Remove the controller board and motherboard.

    • Remove the metal shield at the bottom of the case. Mission complete!

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 6 persone hanno completato questa guida.

Ben Eccles

Membro da: 02/06/16

873 Reputazione

1 Guida realizzata

Team

Ninja Electronics Membro di Ninja Electronics

Business

2 Membri

2 Guide realizzate

2 Commenti

Can you tell me what size the screws are? I need to order a replacement set for my FZ-1

Richard Poll - Replica

I thought I couldn't fix this old appliance in my house. Until I came across this site! Thank you. :)

Jellyna Studio - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 9

Ultimi 7 Giorni: 23

Ultimi 30 Giorni: 82

Tutti i Tempi: 6,611