Aggiusta la tua roba Comunità Store

Questa guida ha delle modifiche più recenti. Passa all'ultima versione non verificata.

360fly 4K SD Card Replacement

Introduzione

This guide walks you through how to replace the SD memory card on a 360fly 4K camera.

Cosa ti serve

  1. 360fly 4K SD Card Replacement, Battery: passo 1, immagine 1 di 1

    • Flip the camera upside down and peel off the two plastic screw covers with the metal spudger to reveal the screws.

    Traduci

  2. 360fly 4K SD Card Replacement: passo 2, immagine 1 di 1

    • Remove the two 5 mm screws from the bottom of the camera with a T4 screwdriver.

    Traduci

  3. 360fly 4K SD Card Replacement: passo 3, immagine 1 di 2 360fly 4K SD Card Replacement: passo 3, immagine 2 di 2

    • Gently pry the plastic ring from around the charging plate with the metal spudger.

    • Remove the outside shell by pressing against the center of the charging plate and pulling the bottom shell away from the top shell.

    Traduci

  4. 360fly 4K SD Card Replacement: passo 4, immagine 1 di 1

    • Remove the five 2 mm screws using a T4 screwdriver.

    • Pull off the charging plate assembly.

    Traduci

  6. 360fly 4K SD Card Replacement: passo 5, immagine 1 di 2 360fly 4K SD Card Replacement: passo 5, immagine 2 di 2

    • Gently pry the plug off the port on the circuit board with a plastic opening tool.

    • Remove the four 2 mm screws using a T4 screwdriver.

    • Remove the circuit board from the device.

    Traduci

  7. 360fly 4K SD Card Replacement: passo 6, immagine 1 di 3 360fly 4K SD Card Replacement: passo 6, immagine 2 di 3 360fly 4K SD Card Replacement: passo 6, immagine 3 di 3

    • Remove the five 4 mm screws around the battery assembly with a T4 screwdriver.

    • Lift the battery assembly and gently pry the plug out of its port on the board below with a plastic opening tool.

    • Press the battery from the back of the battery assembly to remove it with a plastic opening tool until the glue releases the battery.

    • Potential for device damage: Do not puncture or bend the battery. Use a small amount of heat to assist in softening the adhesive if necessary.

    Traduci

  8. 360fly 4K SD Card Replacement, SD Card: passo 7, immagine 1 di 1

    • Gently pry the plug from the motherboard and remove the motherboard from the assembly.

    Traduci

  9. 360fly 4K SD Card Replacement: passo 8, immagine 1 di 1

    • Remove the three 3mm T4 screws from the circuit assembly with a T4 screwdriver.

    Traduci

  10. 360fly 4K SD Card Replacement: passo 9, immagine 1 di 1

    • Gently pry out the plug from the circuit assembly.

    Traduci

  11. 360fly 4K SD Card Replacement: passo 10, immagine 1 di 1

    • Press and release the SD card to remove it from the circuit assembly.

    Traduci
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Autore

con 3 altri collaboratori

Jacob Herron

Membro da: 11/08/17

463 Reputazione

3 Guide realizzate

Distintivi: 8

+5 altri distintivi

Team

IUPUI, Team S5-G3, Baechle Fall 2017 Membro di IUPUI, Team S5-G3, Baechle Fall 2017

IUPUI-BAECHLE-F17S5G3

3 Membri

3 Guide realizzate

Un commento

Really useful guide, thanks

John Erikson - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 11

Tutti i Tempi: 1,073