2014 Subaru Impreza Hatchback Brake light Replacement

Introduzione

If your 2014 Subaru Impreza Hatchback's brake lights aren't lighting up, use this guide to replace the brake lights of the vehicle. This procedure does not require any special equipment or any expertise in home improvement.

One of the most common reasons for this issue to occur is because the fuse in the bulb has either burnt out or the bulb's connectors have become faulty. These problems can be mitigated by replacing the bulb with a new one.

Before beginning, make sure to turn off the car's engine.

Cosa ti serve

Passo 1 Brake Light

2014 Subaru Impreza Hatchback Brake light Replacement, Brake Light: passo 1, immagine 1 di 1

Turn off car engine

Modifica

Passo 2

Open the trunk of the car.

Modifica

Passo 3

Unscrew the both the 2 cm Phillips #3 screws encircled in the image shown with a Phillips #3 screw driver.
Unscrewing them will allow you to take out the brake light.

Modifica

Passo 4

Unscrew both the 2 cm Phillips #3 screws by turning the screwdriver counterclockwise.

Modifica

Passo 5

Gently pull the rear light straight back.

Modifica

Passo 6

Upon opening the brake light, you should see three bulbs in total.
The brake light is the one on the bottom.

Modifica

Passo 7

To remove the brake light, twist the light bulb socket counterclockwise.
The bulb should come out as shown in the second image.

Modifica

Passo 8

To remove the bulb, gently pull out the bulb from its connector.

Modifica

Passo 9

Gently insert the new bulb into the connector.
Carefully insert the bulb, as the bulb is made of glass it is susceptible to breaking and cutting you if a lot of force is used to insert it in the connector.

Modifica