Questa versione può contenere modifiche errate. Passa all'ultima istantanea verificata.
Cosa ti serve
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Drive slowly onto ramps to prop up your Subaru Legacy.
-
Align the oil pan on the Legacy with the oil pan you're using to collect the oil being drained.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Loosen the drain bolt with your 17mm socket wrench just enough to where you're able to loosen the rest by hand.
-
Remove the bolt and washer by hand to allow the oil to drain into the oil pan.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Once your Legacy is completely empty of oil, clean off the bolt and washer and tighten them by hand until you can't turn it anymore.
-
Turn the bolt another 1.5 turns with the 17mm wrench.
-
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
On a 2013 Subaru Legacy the oil filter should be by the battery. Loosen the oil filter by hand if possible. If not, use an oil wrench or a crescent wrench to loosen it.
-
Clean the tray around the oil filter after you remove it with a paper towel.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Rub a little bit of the new oil you bought onto the new oil filter's gasket.
-
Screw on the new oil filter by hand until it is tight. You don't have to use the wrench to tighten the filter.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Fill your car with the oil mentioned in your owner's manual.
-
-
Questo passaggio è privo di traduzione. Aiuta a tradurlo
-
Remove the dipstick and clean it. Then reinsert it and remove it again and ensure the second dot on the end of the dipstick is touched by oil.
-