Introduzione

Rear dome light bulbs go out in cars and it's convenient to have them light up when needed. Simply replacing the bulbs will solve the problem and allow backseat riders to utilize light when it's dark out.

Parti

Use one hand to push up on the roof surrounding the plastic cover and utilize a flathead screwdriver to gently pry out light fixture and cover.
  • Use one hand to push up on the roof surrounding the plastic cover and utilize a flathead screwdriver to gently pry out light fixture and cover.

Aggiungi Commento

Starting with the 2 clips on each side of the light, remove the 10 clips on the fixture.
  • Starting with the 2 clips on each side of the light, remove the 10 clips on the fixture.

  • The user should loosen every clip before removing fixture.

Aggiungi Commento

  • Once the clips are loose, pop off the plastic cover grey plastic cover.

Aggiungi Commento

  • Using hose pliers, pull out the bulb being replaced.

  • Now, insert new bulb by securing it into socket and pushing into place.

Aggiungi Commento

  • Reinstall plastic light fixture by pushing cover back into place.

  • Fixture should easily snap back in with proper placement.

Aggiungi Commento

  • Finally, test the new lights by turning them on and off a few times for 30 seconds or so to assure they work properly.

  • If they do not work then the next suggestion would be to check the fuse box before heading to the dealer.

  • Sometimes fuses blow out which can be spotted by careful analysis. If two parts of the fuse do not meet such as disconnected wires then you have a blown fuse.

Aggiungi Commento

Linea Traguardo

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 14

Tutti i Tempi: 93