Aggiusta la tua roba Comunità Store

2009 Subaru Impreza WRX Rear Door Panel Replacement

Introduzione

Replacing the rear door panel is necessary for replacing the rear door speaker. This guide will show you how to replace the rear door panel if it is broken, or simply how to remove the panel in order to access the speaker.

Cosa ti serve

  1. 2009 Subaru Impreza WRX Rear Door Panel Replacement, Rear Door Panel: passo 1, immagine 1 di 1

    • Pry off the plastic tab inside the rear door handle.

    Modifica

  2. 2009 Subaru Impreza WRX Rear Door Panel Replacement: passo 2, immagine 1 di 1

    • Use the Phillips screwdriver to unscrew the 8x3/4" Phillips screw inside the door handle.

    Modifica

  3. 2009 Subaru Impreza WRX Rear Door Panel Replacement: passo 3, immagine 1 di 1

    • Use a flathead screwdriver to pry up the plastic tab inside the rear door armrest.

    Modifica

  4. 2009 Subaru Impreza WRX Rear Door Panel Replacement: passo 4, immagine 1 di 1

    • Use the Phillips screwdriver to unscrew the 8x3/4" Phillips screw inside the armrest.

    Modifica

  6. 2009 Subaru Impreza WRX Rear Door Panel Replacement: passo 5, immagine 1 di 2 2009 Subaru Impreza WRX Rear Door Panel Replacement: passo 5, immagine 2 di 2

    • Use flathead to pry off the upper panel located at the top of the rear door panel.

    Modifica

  7. 2009 Subaru Impreza WRX Rear Door Panel Replacement: passo 6, immagine 1 di 2 2009 Subaru Impreza WRX Rear Door Panel Replacement: passo 6, immagine 2 di 2

    • Use the flathead screwdriver to pry off and remove the panel over the door handle.

    Modifica

  8. 2009 Subaru Impreza WRX Rear Door Panel Replacement: passo 7, immagine 1 di 1

    • Remove the bundle of wires from the panel by pressing the tabs on the sides of the large white plastic connector.

    Modifica

  9. 2009 Subaru Impreza WRX Rear Door Panel Replacement: passo 8, immagine 1 di 1

    • Use the Phillips screwdriver to unscrew the 8x3/4" screws behind the door handle panel that was just removed.

    Modifica

  10. 2009 Subaru Impreza WRX Rear Door Panel Replacement: passo 9, immagine 1 di 1

    • Use the flathead screwdriver to pry off the door panel, starting from the outside edge of the door.

    Modifica

  11. 2009 Subaru Impreza WRX Rear Door Panel Replacement: passo 10, immagine 1 di 1

    • Use your hands to pull off and remove the door panel from the frame.

    Modifica

  12. 2009 Subaru Impreza WRX Rear Door Panel Replacement: passo 11, immagine 1 di 1

    • Using your hands, remove the two remaining wires connecting the door panel to the frame.

    • The door panel is now completely removed from the frame.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 4 altri collaboratori

Joseph Coplon

Membro da: 04/20/15

101 Reputazione

1 Guida realizzata

Distintivi: 4

+ 1 altro distintivo

Team

Cal Poly, Team 8-3, Regan Spring 2015 Membro di Cal Poly, Team 8-3, Regan Spring 2015

CPSU-REGAN-S15S8G3

5 Membri

5 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 2

Ultimi 30 Giorni: 11

Tutti i Tempi: 2,436