2008-2016 Ford Fiesta Windshield Washer Nozzle Replacement (2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016)

Introduzione

This guide shows readers the process of repairing a car washer nozzle. The car washer nozzle can become dysfunctional when it is clogged or loosened due to the heat produced by the engine, which can cause the washer to expand.

The guide will provide the steps needed to replace the washer nozzle.

Cosa ti serve

Passo 1 Washer Nozzle

2008-2016 Ford Fiesta Windshield Washer Nozzle Replacement, Washer Nozzle: passo 1, immagine 1 di 3

2008-2016 Ford Fiesta Windshield Washer Nozzle Replacement, Washer Nozzle: passo 1, immagine 2 di 3

2008-2016 Ford Fiesta Windshield Washer Nozzle Replacement, Washer Nozzle: passo 1, immagine 3 di 3

Unlatch the hood from the inside of your car.
If you're doing this right after driving your car, turn off the engine and let it cool down before working on it.
Put your fingers under the hood and lift the lever. With your other hand, raise the hood up.
The hood should rest on the support rod on its own; you can now remove the hand that was initially supporting the hood.

Modifica

Passo 2

2008-2016 Ford Fiesta Windshield Washer Nozzle Replacement: passo 2, immagine 3 di 3

Remove all pins from the cover by firmly bending them out of the hood
You can use a mask to prevent inhaling dirt from the cover

Modifica

Passo 3

2008-2016 Ford Fiesta Windshield Washer Nozzle Replacement: passo 3, immagine 3 di 3

Detach the pressure hose from the washer nozzle.
After detaching, examine the pressure hose for any debris that may have accumulated from the old washer nozzle.

Modifica

Passo 4

2008-2016 Ford Fiesta Windshield Washer Nozzle Replacement: passo 4, immagine 3 di 3

Use pliers to compress the tabs that hold the nozzles in place.
The tabs will be located at the top and bottom of the nozzle from the hood.
Once compressed, firmly grip the nozzle at the top and pull it away

Modifica

Passo 5

Carefully insert the new washer nozzle into the top of the hood, applying gentle pressure until it snaps securely into place.

Modifica

Passo 6

After inserting the washer nozzle, double-check from inside the hood to ensure that the tabs are firmly gripping the hood
Re-attach the hose to the nozzle.

Modifica