Aggiusta la tua roba Comunità Store

2006-2013 Toyota Corolla Ignition Coil Replacement

Introduzione

This is a guide to remove an old ignition coil and install a new one. This is standard maintenance for this vehicle and can be preformed with just a socket wrench with a ten millimeter head.

Cosa ti serve

  1. 2006-2013 Toyota Corolla Ignition Coil Replacement, Ignition Coil: passo 1, immagine 1 di 3 2006-2013 Toyota Corolla Ignition Coil Replacement, Ignition Coil: passo 1, immagine 2 di 3 2006-2013 Toyota Corolla Ignition Coil Replacement, Ignition Coil: passo 1, immagine 3 di 3

    • Pop the hood and remove the black plastic cover over the engine.

    • There is nothing to unscrew, or unlatch, and the cover should lift off. Once removed, the top of the engine will look like the third picture

    Modifica

  2. 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 2, immagine 1 di 2 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 2, immagine 2 di 2

    • Unplug the ignition coil you wish to replace. The coils are numbered one though four, left to right.

    • Do not unscrew the bolt on the ignition coil before this step. It makes the electrical plug more difficult to remove

    Modifica

  4. 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 3, immagine 1 di 1

    • Unscrew the bolt of the coil that needs to be replaced.

    • Be sure to put the bolt in a place you will not lose it!

    Modifica

  5. 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 4, immagine 1 di 2 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 4, immagine 2 di 2

    • Pull the coil straight up and out. It should come off of the spark plug with little resistance.

    Modifica

  6. 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 5, immagine 1 di 2 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 5, immagine 2 di 2

    • Apply a pea-sized amount of grease to the new ignition coil. It should be all around the rubber tip around the bottom.

    • While not required, this step will make any future replacements much easier.

    Modifica

  7. 2006-2013 Toyota Corolla Ignition Coil Replacement: passo 6, immagine 1 di 1

    • When inserting the new ignition coil, press down lightly to ensure it is completely in place.

    • Re-plugging in the ignition coil, and re-screw it in. This can be preformed in either order.

    • Repeat steps three through five as necessary for the other three ignition coils.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Autore

con 1 altro collaboratore

Henderson Gillette

Membro da: 09/23/23

133 Reputazione

1 Guida realizzata

Distintivi: 3

Team

Austin Community College, Team 22-3, Watkins Fall 2023 Membro di Austin Community College, Team 22-3, Watkins Fall 2023

AUSTINCC-WATKINS-F23S22G3

2 Membri

2 Guide realizzate

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 11

Ultimi 7 Giorni: 81

Ultimi 30 Giorni: 306

Tutti i Tempi: 928