2005 Honda CR-V Car Visor Replacement

Introduzione

This is a step-by-step guide on how to replace a sun visor in a 2005 Honda CR-V. With time, you will see that the sun visor will experience some wear and tear, which is an indication that your sun visor should be replaced with a new one. One suggestion that I would like to recommend for your safety is to wear gloves when utilizing any tools.

Prior to beginning these steps, be sure that the car is shut off. Place the car in park and engage the parking brake.

Cosa ti serve

Passo 1 Car Visor

2005 Honda CR-V Car Visor Replacement, Car Visor: passo 1, immagine 1 di 2

2005 Honda CR-V Car Visor Replacement, Car Visor: passo 1, immagine 2 di 2

Ensure that the car is parked and utilize the parking brake.
Press the switch on the left of the parking lever, pull it outwards, and release it when it is fixed and outward.

Modifica

Passo 2

Remove the outer shell with a spudger.
When the outer shell is loose enough, remove it with your hand.

Modifica

Passo 3

2005 Honda CR-V Car Visor Replacement: passo 3, immagine 3 di 3

Remove the two 4.5 mm screws from the visor with a Torx screwdriver.
After removing the inner layer, the sun visor is now released.

Modifica

Passo 4

Put the 4.5 mm screw removed in the previous step in the new sun visor.
Tighten the screw using a Torx screwdriver.
Also, note that the shape of the shell is aligned with the form of the hole in the roof.

Modifica

Passo 5

Screw in the rest of the 4.5 mm screws back in the sun visor using a Torx screwdriver.
Ensure that the screws are tight.

Modifica

Passo 6

2005 Honda CR-V Car Visor Replacement: passo 6, immagine 3 di 3

Put the outer shell back on top of the inner shell.
Finally, ensure that the sun visor can be moved to the driver-side window and twisted upwards and downwards.

Modifica