2005 Honda CBR600RR Headlight Bulb Replacement

Introduzione

This guide details the process of replacing a worn out or damaged headlight bulb of a 2005 Honda CBR600RR. Due to this being a common issue occurring in the headlights of this particular make of the bike, it is very important to replace the bulb when damaged, as that leads to the biker being a hazard on the road, especially at night.

This guide provides all the necessary steps for anyone looking to perform this particular fix or something similar.

NOTE: Do not perform the procedure with the bike on.

Cosa ti serve

Passo 1 Headlight Bulb

2005 Honda CBR600RR Headlight Bulb Replacement, Headlight Bulb: passo 1, immagine 1 di 2

2005 Honda CBR600RR Headlight Bulb Replacement, Headlight Bulb: passo 1, immagine 2 di 2

Turn off the bike before beginning.
Remove the bike seat by grabbing both ends and pulling the seat toward the rear wheel.
Locate the screw on the battery.

Traduci

Passo 2

Use a Phillips #0 screwdriver to remove the single screw, disconnecting the power to the battery.

Traduci

Passo 3

Pull the bulb's plug directly out of its port.

Traduci

Passo 4

Remove the outer rubber boot by pulling it towards yourself.

Traduci

Passo 5

While pushing down on the silver pin, pull the bulb directly out of its socket without turning.

Traduci

Passo 6

Wear latex or nitrile gloves when handling the new bulb.
Insert the new bulb into the empty socket and secure it by gently pushing it into place until properly seated.

Traduci