Salta al contenuto principale

2002-2007 Jeep Liberty Rear Indicator Light Replacement

Cosa ti serve

  1. 2002-2007 Jeep Liberty Rear Indicator Light Replacement, 2002-2007 Jeep Liberty Rear Indicator Light: passo 1, immagine 1 di 1
    • Open the vehicle's rear door to access the tail light assembly.

  2. 2002-2007 Jeep Liberty Rear Indicator Light Replacement: passo 2, immagine 1 di 2 2002-2007 Jeep Liberty Rear Indicator Light Replacement: passo 2, immagine 2 di 2
    • Use the T-20 Torx screwdriver to unscrew the two screws holding the tail light cover.

  3. 2002-2007 Jeep Liberty Rear Indicator Light Replacement: passo 3, immagine 1 di 2 2002-2007 Jeep Liberty Rear Indicator Light Replacement: passo 3, immagine 2 di 2
    • Remove cover by pulling out and away from car.

    • The cover is fastened with two plastic alignment pins.

  4. 2002-2007 Jeep Liberty Rear Indicator Light Replacement: passo 4, immagine 1 di 3 2002-2007 Jeep Liberty Rear Indicator Light Replacement: passo 4, immagine 2 di 3 2002-2007 Jeep Liberty Rear Indicator Light Replacement: passo 4, immagine 3 di 3
    • Twist the middle socket counter-clockwise.

    • Pull the socket out of the tail light assembly to access bulb.

  5. 2002-2007 Jeep Liberty Rear Indicator Light Replacement: passo 5, immagine 1 di 2 2002-2007 Jeep Liberty Rear Indicator Light Replacement: passo 5, immagine 2 di 2
    • Grasp the lightbulb and pull it out of the socket.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 3 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 9

Ultimi 7 Giorni: 28

Ultimi 30 Giorni: 103

Tutti i Tempi: 5,100