Introduzione

A simple and effective guide on replacing the headlights, taillights, and overhead light.

Parti

Nessuna parte richiesta.

  1. Open your tailgate fully, exposing both sides where the tailgate sits.
    • Open your tailgate fully, exposing both sides where the tailgate sits.

    Aggiungi Commento

  2. Unscrew the two phillips head screws located above and below the tailgate support.
    • Unscrew the two phillips head screws located above and below the tailgate support.

    Aggiungi Commento

    • Once the screws have been removed, simply pull off the taillight. The red plug is the taillight. Twist it a quarter turn counter clockwise, and pop it out.

    Aggiungi Commento

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the old bulb and replace it with your new one.

    • Side note: Make sure replacement bulb is save voltage/amperage rating.

    Aggiungi Commento

    • Open the hood and take a look above your headlights.

    Aggiungi Commento

    • Two metal pins holding each of the headlights in place will need to be removed (no tool necessary).

    • Turn the plastic headlight mount counter clockwise by one quarter of a turn.

    • Then lift the pins up to fully remove them.

    Aggiungi Commento

    • Once the pins have been removed, GENTLY pull your headlight upwards, towards you. The bulbs should now be exposed. The bulb on the top is your headlight.

    Aggiungi Commento

    • As you did with the taillight bulb, turn the piece that is holding the bulb in place a quarter turn counter clockwise, and the bulb will pop out. Now your new bulb will take it's place.

    Aggiungi Commento

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 5 persone hanno completato questa guida.

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 4

Tutti i Tempi: 258