Salta al contenuto principale

1999 - 2003 Acura TL Ignition Coil Replacement

Cosa ti serve

  1. 1999 - 2003 Acura TL Ignition Coil Replacement, Ignition Coil: passo 1, immagine 1 di 2 1999 - 2003 Acura TL Ignition Coil Replacement, Ignition Coil: passo 1, immagine 2 di 2
    • Open the driver side door of car.

  2. 1999 - 2003 Acura TL Ignition Coil Replacement: passo 2, immagine 1 di 2 1999 - 2003 Acura TL Ignition Coil Replacement: passo 2, immagine 2 di 2
    • Pull the hood latch below the steering wheel and near the door frame towards you to pop open the hood.

  3. 1999 - 2003 Acura TL Ignition Coil Replacement: passo 3, immagine 1 di 2 1999 - 2003 Acura TL Ignition Coil Replacement: passo 3, immagine 2 di 2
    • Lift the hood slightly to where your fingers can fit under the hood.

    • Reach your fingers under the hood to find the latch that is slightly right off the center.

    • Pull and hold the latch up while simultaneously lifting the hood all the way up until it stays stationary.

    • Be careful that the hood is lifted properly to avoid an accident.

  4. 1999 - 2003 Acura TL Ignition Coil Replacement: passo 4, immagine 1 di 3 1999 - 2003 Acura TL Ignition Coil Replacement: passo 4, immagine 2 di 3 1999 - 2003 Acura TL Ignition Coil Replacement: passo 4, immagine 3 di 3
    • Use a flathead screwdriver to remove one screw from each corner of the cover.

  5. 1999 - 2003 Acura TL Ignition Coil Replacement: passo 5, immagine 1 di 1
    • Pull the engine cover towards you to remove it.

  6. 1999 - 2003 Acura TL Ignition Coil Replacement: passo 6, immagine 1 di 3 1999 - 2003 Acura TL Ignition Coil Replacement: passo 6, immagine 2 di 3 1999 - 2003 Acura TL Ignition Coil Replacement: passo 6, immagine 3 di 3
    • Pinch the socket, attached to engine coil, and pull up to release.

    • With an Allen key, loosen the screw holding the coil by turning counterclockwise.

    • Make sure to avoid exposed wires.

  7. 1999 - 2003 Acura TL Ignition Coil Replacement: passo 7, immagine 1 di 3 1999 - 2003 Acura TL Ignition Coil Replacement: passo 7, immagine 2 di 3 1999 - 2003 Acura TL Ignition Coil Replacement: passo 7, immagine 3 di 3
    • Pull out the old coil.

    • Avoid exposed wires.

  8. 1999 - 2003 Acura TL Ignition Coil Replacement: passo 8, immagine 1 di 3 1999 - 2003 Acura TL Ignition Coil Replacement: passo 8, immagine 2 di 3 1999 - 2003 Acura TL Ignition Coil Replacement: passo 8, immagine 3 di 3
    • Insert the new coil.

  9. 1999 - 2003 Acura TL Ignition Coil Replacement: passo 9, immagine 1 di 2 1999 - 2003 Acura TL Ignition Coil Replacement: passo 9, immagine 2 di 2
    • Attach the wire socket to the new coil until you hear a "click," indicating that it is properly inserted.

  10. 1999 - 2003 Acura TL Ignition Coil Replacement: passo 10, immagine 1 di 1
    • With an Allen key, tighten the screw into the new coil turning clockwise to secure into place.

  11. 1999 - 2003 Acura TL Ignition Coil Replacement: passo 11, immagine 1 di 3 1999 - 2003 Acura TL Ignition Coil Replacement: passo 11, immagine 2 di 3 1999 - 2003 Acura TL Ignition Coil Replacement: passo 11, immagine 3 di 3
    • Reattach the engine cover and secure the screws with the flathead screwdriver.

Conclusione

To reassemble your device, follow these instructions in reverse order.

Un'altra persona ha completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 2

Ultimi 7 Giorni: 11

Ultimi 30 Giorni: 16

Tutti i Tempi: 134