Aggiusta la tua roba Comunità Store

1999-2006 BMW 3 Series Ignition Coils Replacement

Introduzione

This tutorial will focus on the replacement of the six ignition coils of the 3 Series BMW (1999-2006) due to engine misfires. Some reasons for engine misfires can include rough idling and late shifting. The BMW series 3 (1999-2006) also needs regular replacements for the car’s ignition coils. BMW recommends replacing these ignition coils every 100,000 miles for non-turbocharged vehicles and every 45,000 miles for turbo-charged vehicles. With the help of this tutorial, you will have no problem keeping your BMW 3 series running smoothly and at its optimal performance.

Cosa ti serve

  1. 1999-2006 BMW 3 Series Ignition Coils Replacement, Ignition Coils: passo 1, immagine 1 di 3 1999-2006 BMW 3 Series Ignition Coils Replacement, Ignition Coils: passo 1, immagine 2 di 3 1999-2006 BMW 3 Series Ignition Coils Replacement, Ignition Coils: passo 1, immagine 3 di 3

    • Release the hood latch by pulling the lever found in the driver foot well.

    • Open the hood.

    Modifica

  2. 1999-2006 BMW 3 Series Ignition Coils Replacement: passo 2, immagine 1 di 3 1999-2006 BMW 3 Series Ignition Coils Replacement: passo 2, immagine 2 di 3 1999-2006 BMW 3 Series Ignition Coils Replacement: passo 2, immagine 3 di 3

    • Remove the oil cap and note the four bolt placements.

    Modifica

  4. 1999-2006 BMW 3 Series Ignition Coils Replacement: passo 3, immagine 1 di 3 1999-2006 BMW 3 Series Ignition Coils Replacement: passo 3, immagine 2 di 3 1999-2006 BMW 3 Series Ignition Coils Replacement: passo 3, immagine 3 di 3

    • Using a 10 mm socket wrench, remove the four bolts holding down the engine covers.

    Modifica

  5. 1999-2006 BMW 3 Series Ignition Coils Replacement: passo 4, immagine 1 di 3 1999-2006 BMW 3 Series Ignition Coils Replacement: passo 4, immagine 2 di 3 1999-2006 BMW 3 Series Ignition Coils Replacement: passo 4, immagine 3 di 3

    • Note the placement of each ignition coil then remove the plastic latch and disconnect each cable.

    Modifica

  6. 1999-2006 BMW 3 Series Ignition Coils Replacement: passo 5, immagine 1 di 1

    • With a firm grip, remove each ignition coil and replace with the new coils respectively.

    • Repeat steps 4 to 1 for reassembly.

    Modifica
Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

0 Commenti

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 1

Ultimi 7 Giorni: 16

Ultimi 30 Giorni: 104

Tutti i Tempi: 2,423